Skip to content

ITHSEN WB-1. Coming soon.

USB 3.0 hardware write blocker

The ITHSEN WB-1 is a hardware write blocker for USB storage. It sits between an evidence drive and the examiner's computer, lets read commands through and refuses every command that could change the drive. It is read-only by construction: there is no write mode and no switch.

The ITHSEN WB-1 USB 3.0 write blocker: a white lid engraved ITHSEN USB 3.0 WRITE BLOCKER, with seven labelled status lights along the front edge and the EVIDENCE port on the left side.
ITHSEN WB-1

Specifications

What it is.

Everything it does, and everything in the box.

Model
ITHSEN WB-1
Function
Hardware write blocker for USB mass storage
Operating mode
Read-only. No write mode.
Evidence port
USB 3.0 Type-A (drive side)
Computer port
USB 3.0 Type-B (workstation side)
Power
USB-C, 5 V DC / 3 A, adapter supplied
Status lights
7: DRIVE, READ ONLY, FAULT, PC, WRITE BLOCKED, FAULT, POWER
Enclosure
107 x 87 x 26 mm, no visible screws
In the box
Write blocker, power adapter, USB-C power cable, USB 3.0 A-B cable, quick start card, test certificate, warranty card
Origin
Designed and made in India

Write rejection test

test checks passed
26/26
modifying commands refused
24/24
bytes written to the drive
0

Lab test on a Windows 11 workstation, November 2026. Every production unit ships with its own test certificate.


Status lights

Seven lights, left to right.

Green is normal, yellow asks for attention, red is a fault. WRITE BLOCKED flashing is normal: computers often try to write to a drive when it is connected. Each flash is one write command that was refused.

  1. DRIVE

    Evidence side

    On: drive ready. Blinking: reading.

  2. READ ONLY

    Evidence side

    On: write protection is running.

  3. FAULT

    Evidence side

    Evidence-side fault. Stays on until power is removed.

  4. PC

    Computer side

    On: recognised by the computer. Blinking: transfer.

  5. WRITE BLOCKED

    Computer side

    Flashes each time a write command is refused.

  6. FAULT

    Computer side

    Computer-side fault. Stays on until power is removed.

  7. POWER

    Device

    On: the device is powered.


In use

Five steps from seized drive to verified image.

  1. 01

    Connect the supplied 5 V / 3 A adapter to the USB-C port. POWER and READ ONLY light up.

  2. 02

    Connect COMPUTER to your workstation with the supplied USB 3.0 cable. PC lights up.

  3. 03

    Connect the evidence drive to EVIDENCE. DRIVE lights up when the drive is ready.

  4. 04

    Acquire the image with your forensic software and verify the hash values.

  5. 05

    When finished, eject the drive in the software, unplug the drive, then remove power.

Do not connect evidence unless READ ONLY is lit.

The ITHSEN WB-1 kit, open: the write blocker, a power adapter and cables in a foam insert, with the lid printed ITHSEN USB 3.0 WRITE BLOCKER, MODEL WB-1.
The WB-1 kit

Software to match

ITHSEN Imager

ITHSEN Imager makes a bit-for-bit copy of an evidence drive, proves the copy with SHA-256 and writes the report for your case file. It is designed alongside the WB-1 and works with other hardware write blockers too.

See what Imager does

Guides

New to write blockers, or comparing options?


Questions

About the WB-1.

How does the ITHSEN WB-1 block writes?

The WB-1 sits between the evidence drive and the computer and checks every command twice. Read commands are passed on. Commands that would modify the drive are refused and the computer is told the medium is write protected. The device has no write mode at all.

Can the WB-1 be switched to read/write mode?

No. The WB-1 is read-only. It has no write mode, no switch and no write path in its hardware or firmware.

Which drives does the WB-1 work with?

The WB-1 is built for USB mass storage: USB flash drives, memory cards in a USB card reader, and external USB hard drives and SSDs. Connect the drive to the USB 3.0 Type-A evidence port.

How fast is the WB-1?

The WB-1 runs SuperSpeed USB 3.0 on both the evidence and computer sides, ten times the bandwidth of a USB 2.0 write blocker. A large drive that takes all night on USB 2.0 is done in a fraction of the time.

How is the WB-1 tested?

We test the WB-1 against the commands a computer can send to change a drive: write, erase, format, settings changes and more. In our lab test all 24 modifying commands were refused and not one byte reached the drive. Every production unit ships with its own test certificate.

Is the WB-1 an affordable forensic write blocker?

Yes. The WB-1 does one job, read-only access to USB storage, and leaves out screens, extra interfaces and built-in imaging that raise the price of larger units. It is designed and made in India so that labs, police units, trainers and students here can buy and get support locally. Pricing will be announced at launch.

When can I buy the WB-1?

The WB-1 is coming soon. Email contact@shopdibz.com to be first to hear about launch and pricing.

Is the WB-1 made in India?

Yes. The WB-1 is designed and made in India by Shopdibz Pvt Ltd, Trivandrum, Kerala.

Contact

Want one on your bench when it ships?

Tell us who you are and what you image. We will write when the WB-1 is ready. Labs, agencies, trainers and distributors welcome.

Email contact@shopdibz.comReplies come from Shopdibz Pvt Ltd