Choosing an affordable forensic write blocker: what to check, what to skip
By ITHSEN Electronics. Updated . 6 min read.
Short answer
An affordable forensic write blocker is one that does the essential job, blocking every write to the evidence drive, without the extras that raise the price: many interfaces, screens and built-in imaging. Save money on features. Do not save money on testing, clear status indication or support.
Why write blockers cost what they do
A write blocker looks like a simple box, and buyers are often surprised by the price. Most of the cost comes from four things.
- Interfaces. A unit that accepts SATA, IDE, USB, NVMe and memory cards needs separate electronics for each one.
- Extras. Screens, built-in imaging, hashing and network features turn a write blocker into a small computer.
- Small volumes. Forensic tools sell in thousands, not millions, so development cost is spread over few units.
- Import. Most write blockers used in India are imported, which usually means duty, shipping and distributor margin on top of the price, and slower repairs.
A blocker can therefore be made much cheaper without making it less safe, by doing one job on one interface and being built close to its users.
What you can safely skip
- Interfaces you do not image. If your cases are mostly pen drives and external USB disks, a USB write blocker covers them.
- A built-in screen. Clear status lights tell you what you need to know.
- Built-in imaging and hashing. Free and commercial imaging software on your computer does this well.
- A read/write switch. For evidence work you never want write mode, and a switch is one more thing to get wrong.
What you should never skip
Whatever the price, check these before you trust a write blocker with evidence.
- 01It is a hardware blocker. The protection must not depend on your computer's settings.
- 02It blocks every modifying command, not only the common write command. Erase, format and settings commands change a drive too. Ask the maker which commands were tested.
- 03It shows its state clearly. You should be able to see that protection is active before you connect evidence, and see when a write was refused.
- 04It fails safe. If something goes wrong, it should stop and report an error rather than pass data it is unsure about.
- 05It has published test evidence. A maker should be able to say what was tested and how. Organisations such as the NIST Computer Forensics Tool Testing programme publish test methods for write blockers that anyone can follow.
- 06It matches your interface speed. A USB 2.0 blocker on a large USB 3.0 drive can turn a two-hour job into an overnight one.
- 07It powers the drive properly. Portable hard disks draw their power from the port, so the blocker needs a supply that can run them.
- 08It comes with support you can reach. A warranty and a maker who answers email are worth more than a slightly lower price.
Test your own unit before first use, whatever you buy. Hash a spare drive, connect it through the blocker, try to write and delete files, then hash it again. The two hash values must be identical.
A warning about very cheap options
Three shortcuts come up often when the budget is tight. None of them is a write blocker.
- USB adapters and docks sold as "read-only". Unless the maker states which commands are blocked and how it was tested, treat the label as marketing.
- The lock switch on an SD card or adapter. It is only a request to the card reader, and many readers ignore it.
- Operating system read-only settings. They are useful as a second layer, but the system can still write to a drive while recognising it.
Where the ITHSEN WB-1 fits
The ITHSEN WB-1 is our answer to this problem: a hardware write blocker for USB storage that does one job and is built to be affordable.
- USB 3.0 on both the evidence side and the computer side.
- Read-only only. There is no write mode and no switch.
- Every command is checked twice before it can reach the drive.
- Seven labelled status lights, including one that flashes each time a write is refused.
- Designed and made in India by Shopdibz Pvt Ltd, with support from the team that designed it.
Pair it with ITHSEN Imager, our imaging software, and you have the whole acquisition in one kit: protect the drive, copy it, verify it and report it.
The WB-1 is coming soon. Pricing will be announced at launch.
Common questions
What is the most affordable way to write-protect evidence properly?
A single-interface hardware write blocker used with imaging software on a computer you already own. It costs far less than a multi-interface unit or a standalone forensic imager, and it protects the evidence drive just as well for the interface it supports.
Are cheap write blockers safe to use for evidence?
Price alone does not decide it. A low-cost blocker is safe if it is a real hardware blocker, blocks every modifying command, shows its state clearly and comes with published test evidence. An untested adapter labelled read-only is not safe at any price. Always test your own unit with hash values before first use.
Do I need a write blocker with SATA and NVMe, or is USB enough?
It depends on what you image. Pen drives, memory card readers and external hard disks are USB devices, and a USB write blocker handles them. Bare internal drives taken out of computers are best imaged through a blocker made for their interface.
Is there an Indian-made forensic write blocker?
The ITHSEN WB-1 is a USB 3.0 hardware write blocker designed and made in India by Shopdibz Pvt Ltd. It is coming soon. Email contact@shopdibz.com for launch updates.
Read next